Hệ thống trượt xoay SF 25 / Khung nhôm
Hệ thống trượt xoay SUNFLEX làm tăng thêm vẻ đẹp cho bất kỳ ngôi nhà nào nhờ sự tương phản giữa kính và tường. Các tấm kính rời, có thể di chuyển riêng lẻ, có thể được mở ra trên toàn bộ mặt tiền và được xếp chồng lên nhau thành một chồng hẹp ở bên hông, đảm bảo lối đi thông thoáng từ trong ra ngoài và không làm ảnh hưởng đến thẩm mỹ. Các tấm kính mở này chiếm rất ít diện tích.
Technical Details
Downloads
Thông tin hệ thống
Hệ thống hồ sơ
- Low-wear and maintenance-free fittings
- Different the bottom tracks
- Pressure-free drainage of bottom track by inclined floor construction
- Catch channel at the inside of the bottom track to drain condensation and cleaning waters
- Top-hung construction with a choice of flush or weather-proof bottom track options
- Horizontal running mechanism with triple stainless steel ball bearings and carbon fiber-reinforced polyamide wheels
- Inwards or outwards opening of the panels
- Choice of panel partition and sliding direction
- Height compensation of up to 22 mm (+-11 mm)
- Double brush seal with plastic bridge at top and bottom of the glass panels
- Airborne sound insulation up to Rw 34 dB according to DIN EN ISO 140-3
- Glass thickness of 8 and 10 mm depending on static requirements
- Screwed glazing for effortless future replacement of glass
Fittings
- All fittings are concealed within the profiles
- Low-maintenance, non-corroding and fail safe fittings
- Inside and/or outside locking and unlocking possible
- Locking and unlocking via pull rod or turning knob Optionally with lever lock (“child-proof”)
Running assembly
- Top running, maintenance-free horizontal running assemblies, each equipped with two rollers
- The running assemblies feature each three smooth-running needle bearings and two carbon fibre reinforced polyamide rollers
- Running assemblies out of stainless steel metal components
- Low-noise, low-wear, heat and cold resistant running surfaces
- Running assemblies pivot at any angle between 90° and 180°
- Sealing and ventilation
- Tongue and groove system between the panels
- Brush gaskets are fitted horizontally at the top and bottom on the inside and outside
- Lower and upper brush gaskets are attached to the panel frames and not to the guide track
Glazing
- 6, 8, and 10 mm tempered safety glass panes (ESG-H)
- Panes secured via concealed screw-fixing system in top and bottom panel profiles
- Subsequent replacement of panes without difficult
Drainage
- Unpressurized drainage via inclined floor construction
- Integrated water drainage channel on inside of bottom track
- End-caps for lateral sealing of bottom track
